Hermosa VRP

Use this guide with the product label and safety information. If the label differs from this page, the label takes precedence.

What you’re working towards

Clean, hydrated vinyl, rubber and plastic with an even finish and no sticky residue.

What you need

• Hermosa VRP
• Waterproof gloves
• Clean applicator or microfibre cloth
• Separate clean towel for levelling

Application

1. Identify and test the surface. Confirm it is compatible vinyl, rubber or plastic; test a hidden area.
2. Clean and dry. Remove dirt, previous dressings and residue before application.
3. Apply to the cloth. Mist VRP onto the applicator rather than surrounding surfaces.
4. Spread a thin, even layer. Work methodically across the surface.
5. Level completely. Wipe with a clean towel until the finish is even and non-sticky.

When to pause

Keep product away from steering wheels, pedals, tyre tread, clear instrument screens and any surface where added slip could be unsafe.

Check the surface before you start

Identify the material and the problem you want to treat. Previous coatings, repairs, damage, temperature and application technique can all affect the result. Test a hidden area if you are unsure how the surface will respond.

These directions bring together Hermosa’s product and application guidance and available safety information. They do not mean every material or technique has been laboratory tested. Follow the current product label, SDS and vehicle or material manufacturer’s instructions if they differ from this guide.

Work on a cool surface, out of direct sun, in sections small enough to control. If a first pass does not give the result you expected, check the surface and your method before adding more product, increasing the concentration, rubbing harder or leaving it on longer.

Before you put the tools away

• Inspect the whole treated area in good light, from more than one angle. Check for an even finish and remove residue, overspray and excess product.
• Check visibility and grip wherever the treated surface could affect driving. Resolve any issue before using the car.
• Keep tools for wheels, paint, glass and interiors separate. Clean them after use and discard contaminated consumables.
• Follow the drying, curing and washing restrictions on the label and in the steps above.
• For an unusual material, note what you used and how it responded. It will help next time.